Air Release Plug with O-RingsThe FatSac Air Release plug makes it easy to purge air from your wakeboard ballast bags without spilling any water.The Air Release plug is a direct replacement for the standard ballast plug used with FatSac wakeboard ballast...

Wally Plug with O-RingsFatSac Replacement Ballast Bag Plug is used to plug unused holes on FatSac ballast bags. Fits the proprietary thread pattern used on FatSac bags making a perfect water-tight seal that won't leak or back out over time.Off-the-shelf...

Female Quick Connect with CapThe standard connector that comes with every FatSac ballast bag and allows you to connect various FatSac Quick Twist adapters.  Fitting system comes with the Quick Twist adapter and the Quick Twist Cap connected...

Fluorescent Dye Marker - 2-PackPowder that turns snow or water into a bright fluorescent green signal.  You can write in the snow or on the ground.  Serves as an excellent signal for rescuers to mark your location.Features:Environmentally...

Signaling Kit - Flag, Mirror, Dye Marker & WhistleSelection of visual and audible signals that can be seen or heard by sea or air rescues.  Pack in a polybag.  Includes:1 USCG Approved Distress FlagApproved for daytime use only3' x 3' with...

Clamp-On Flag Pole - 1/2" Diameter Stainless Steel Clamp & PoleFeatures:Clamp-On FlagstaffPole made of 304 S.S.Clamp made of 316 S.S.Diameter - 1/2,Length - 17",Clamp Tube Size-7/8" Specifications:Type: Flags & Flag PolesBox Dimensions: 1"H x...

Top-Mounted Flag Pole Socket - CP/Brass - 1-1/4" IDFeatures:CP/Brass Top Mounted Flag Pole SocketTube I.D. - 1-1/4"Base - 2-3/4"Height - 2-1/8"Fastener - #6(3) Specifications:Type: Flags & Flag PolesBox Dimensions: 2"H x 3"W x 3"L WT: 0.5...

Top-Mounted Flag Pole Socket Polished Brass - 1" IDFeatures:Polished Brass Top Mounted Flag Pole SocketTube I.D. - 1"Base - 2-1/2"Height - 2"Fastener - #6(3) Specifications:Type: Flags & Flag PolesBox Dimensions: 3"H x 3"W x 3"L WT: 0.4...

Top-Mounted Flag Pole Socket Polished Brass - 3/4" IDFeatures:Polished Brass Top Mounted Flag Pole SocketTube I.D. - 3/4"Base - 2"Height - 1-3/4"Fastener - #6(3) Specifications:Type: Flags & Flag PolesBox Dimensions: 2"H x 4"W x 6"L WT: 0...

Top-Mounted Flag Pole Socket CP/Brass - 3/4" IDFeatures:CP/Brass Top Mounted Flag Pole SocketTube I.D. - 3/4"Base - 2"Height - 1-3/4"Fastener - #6(3) Specifications:Type: Flags & Flag PolesBox Dimensions: 1"H x 3"W x 4"L WT: 0.5 lbsUPC:...

Teak Flag Pole - 30" - 1" Base DiameterFeatures:Teak Flag Pole30" Length1" Base DiameterHardware not includedTraditional ball cap style flag pole Specifications:Type: Flags & Flag PolesBox Dimensions: 2"H x 2"W x 30"L WT: 0.7 lbsUPC:...

Teak Flag Pole - 18" - 3/4" Base DiameterFeatures:Teak Flag Pole18" Length3/4" Base DiameterHardware not includedTraditional ball cap style flag pole Specifications:Type: Flags & Flag PolesBox Dimensions: 1"H x 3"W x 18"L WT: 0.4 lbsUPC:...

Gasket & Seal Set for Helm Pumps MT30-MT140Full service kit for VETUS Helm Pumps MT40 to MT140 (including the more recent MTP42, MTP53)Consists of shaft seal (HS801 25 x 42 x 7mm) and back plate gasket (HS804).

Strainer for Type FTR140This strainer is for the FTR140 waterstrainers.

Replacement O-Rings Set - 5-PackSet of 5 O replacement Ring seals for Vetus FTR330 Series Raw Water Strainers.

Set O-Ring & Cover for Waterfilter 330Features:Vetus part #FTR3301 is replacement strainer cover and o-ring for all Vetus FTR330 series raw water strainersSpecifications:Strainer size: 13 (33/64") to 38 mm (1-1/2")Note: Do not overtighten

O-Ring Set for Waterfilter 1320 - 5-PackThis set contains the O-ring (5x) for the FTR1320 Waterfilter

O-Ring & Cover for Waterfilter 1320Replacement lid (Cover) and O Ring kit for the VETUS FTR1320 series raw water strainer units.Fits all sizes from 38 to 51mm.

Adapter Plate to Replace BPS/BPJ Panels with BPSE/BPJE PanelsAdapter plate for use when replacing old BPS/BPJ panels with updated BPSE/BPJE type panels. The updated panels are 85mm x 85mm, whereas the old style panels measured 98mm x 98mm. Quick Guide...

Set of Shear Pins for Bow Thruster 45 & 50kgf - 5-PackSet of brass inboard shear pins (3 x 23.3mm) parallel, for the Vetus 45 and 50Kgf Bow Thrusters.