13mm High-Load Trolley with 2X M4 Tapped HolesThis trolley features recirculating ball bearings housed in strong, lightweight, corrosion-resistant aluminum for dependable, low-friction linear travel. Use for moving loads and equipment, hoisting, and...

Profurl C260 Headsail Reefing-Furling SystemEspecially designed for boats from 5 to 7 meters, the C260 model is a self-contained halyard furling system. Cost-effective, and easy to install on the existing forestay, the C260 does not require any...

Standard Pawl Spring - Small - 20 PackLewmar winch pawl springs are made to fit on most sizes of Lewmar winches and serve as the perfect replacement when performing routine maintenance and service.Features:Designed to be used on Lewmar winches that need...

Genoa Car - Fits 25mm (1") T TrackFeatures a precision-turned Ertalyte sheave, through-bolted for extra strength. The positive action plunger mechanism has an easy-grip knobA popular range of Genoa cars and sliders designed to run on a 25mm (1") 'T'...

Genoa Car - Fits 32mm (1-1/4") T TrackFeature precision turned Ertalyte sheaves running on a large diameter center bearing, for friction-free performance under load. Sheaves are designed with extra width to accept two sheets. The sheave axle is...

Small Furling Drum - 2.99"Drums are molded from glass fiber reinforced nylon with stainless steel swivel and ball bearing assemblies. Furling drums will accept lines up to 4mm in diameter.Features:Holds up to 4.3M of LineSpecifications:Drum Diameter:...

Furling Drum - 3.74"Drums are molded from glass fiber reinforced nylon with stainless steel swivel and ball bearing assemblies. Furling drums will accept lines up to 4mm in diameter.Features:Holds up to 8.5M of LineSpecifications:Drum Diameter: 95mmSail...

Size 5 Vang Tackle 4:1Upgrade your existing Vang system or use it as a boom preventer.  Snap shackle fixings allow for quick and easy deployment.  Professionally spliced and assembled. Compatible With:Boats up to 35' (10.7 M)Technical...

Genoa Slide with Loop for 32mm TrackHave a heavy-duty stainless steel attachment loop, through-bolted and riveted for extra strength. These units will accept most Barton blocks. A popular range of Genoa cars and sliders designed to run on a 32mm (11/4")...

Size 2 Ocean Traveler Kit - 4:1 Purchase SystemLewmar makes selecting your mainsheet system simple - with complete Mainsheet System Kits.  Lewmar's Size 2 Ocean Mainsheet System is a complete kit made specifically for yachts up to 49 feet (15m...

Size 1 Ocean Traveler Kit - 4:1 Purchase SystemLewmar makes selecting your mainsheet system simple - with complete Mainsheet System Kits.Lewmar's Size 1 Ocean Mainsheet System is a complete kit made specifically for yachts up to 36 feet (11m...

Size 0 Ocean Traveler Kit - 2:1 Purchase SystemLewmar makes selecting your mainsheet system simple - with complete Mainsheet System Kits. Lewmar's Size 0 Ocean Mainsheet System is a complete kit made specifically for yachts up to 28 feet (8.5m...

Tidy-Ups Boat Dock Line Holder - Standard RailsFeatures:Rail mount UV resistant vinyl strap securely holds rope, cords, etc. Fits 1" - 1-1/4" RailsNot sold in pairsWARNING: This product can expose you to chemicals including...

Pulpit Anchor for 1" RailThis fitting can be used on the stern rail and bow pulpit to terminate jaw fittings for lower or upper life lines. (1/2" hole). The hole will not accept cast gate hooks. 

Eye to Deck Toggle FittingThis fitting can be mounted to any flat surface and accept life line fittings, line, etc. Toggling action is 140 degrees. 

Eye to Jaw FittingThis fitting will convert a small bail at the stern rail to the standard gate eye to accept the over center gate hook.

Eye to Eye Adjustable FittingThis fitting can be used wherever an eye is required on each side of the stanchion. Adjustable between 3/4" and 1". 

Short Adjuster for 3/16" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications:3/16" Wire1/4" Pin1" adj.

Short Adjuster for 1/8" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications:1/8" Wire1/4" Pin1" adj.

"T" Style Toggle Jaw for 3/16" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.