12mm Bolt-Down Fairlead - SingleHarken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces...

19mm Micro Bullseye Fairlead - No Original PackagingThe 339 fairlead is used when there is little deflection in the line, such as when routing a spinnaker pole foreguy aft along the cabin house.Specifications:Maximum line Ø (mm): 6 mmMaximum line...

Micro Carbo Cam Cleat - No Original PackagingHarken® ball-bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams® for racing where weight is critical or where adjustments...

Shroud Cleat with Eye - NylonFeatures a wide eye-opening for stowage of halyard shackles. Specifications:Color: BlackBox Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs

"Captain Hook" Chain Snubber Large Snubber Hook Only (1/2" T-316 Stainless Steel Stock)The "Captain Hook" Chain Snubber can be used in a few different ways:Use the claw and attached line to relieve tension from your windlass while anchored by snubbing...

"Captain Hook" Chain Snubber Large Snubber Hook for 3/8" & 1/2" Chain with 15' of 5/8" 3 Strand NylonThe "Captain Hook" Chain Snubber can be used in a few different ways:Use the claw and attached line to relieve tension from your windlass while...

"Captain Hook" Chain Snubber Small Snubber Hook Only (5/16" T-316 Stainless Steel Stock)The "Captain Hook" Chain Snubber can be used in a few different ways:Use the claw and attached line to relieve tension from your windlass while anchored by snubbing...

"Captain Hook" Chain Snubber Small Snubber Hook for 1/4" & 5/16" Chain with 12' of 1/2" 3 Strand NylonThe "Captain Hook" Chain Snubber can be used in a few different ways:Use the claw and attached line to relieve tension from your windlass while...

3/8" Pin Chainplate BentSpecifications:Pin Hole: 3/8" (10 mm)Max. Wire: 3/16" (5 mm)Fastener Holes: (4) 3/8" (10 mm)Length: 10" (254 mm)Width: 1-1/4" (31 mm)Thickness: 1/8" (3 mm)Weight: 6.6 oz. (187 g)

Backing Plate for 704-02-62Schaefer Stainless Steel Backing Plate for 704-02-62.

Opening Luff Rope PrefeederFeatures:Single handed operation by pushing on the springEasy to install with a lashing or fixed to the forestayCan be installed below any headsail foil or headsail reefing configurationStainless steel forged...

FRX25 Friction Ring - 25mm (63/64")Features:Efficient and lightFRX Wichard thimbles are efficient, light, and reliableVery strong and can be used for heavy loads and semi-static linesFRX thimbles are designed to make your lines run smoothly with minimum...

FRX20 Friction Ring - 20mm (25/32")Features:Efficient and lightFRX Wichard thimbles are efficient, light, and reliableVery strong and can be used for heavy loads and semi-static linesFRX thimbles are designed to make your lines run smoothly with minimum...

FRX15 Friction Ring - 15mm (19/32")Features:Efficient and lightFRX Wichard thimbles are efficient, light, and reliableVery strong and can be used for heavy loads and semi-static linesFRX thimbles are designed to make your lines run smoothly with minimum...

FRX10 Friction Ring - 10mm (25/64")Features:Efficient and lightFRX Wichard thimbles are efficient, light, and reliableVery strong and can be used for heavy loads and semi-static linesFRX thimbles are designed to make your lines run smoothly with minimum...

FRX6 Friction Ring - 7mm (9/32")Features:Efficient and lightFRX Wichard thimbles are efficient, light, and reliableVery strong and can be used for heavy loads and semi-static linesFRX thimbles are designed to make your lines run smoothly with minimum...

35mm Diameter Plain Bearing SheaveA replacement all-purpose rope sheave.  Used throughout the complete Barton block range.  Molded from UV-resistant acetal resin, the Barton sheave is made to survive the harsh marine environment.   The...

165mm Sliding Cleat - Fits 25mm T TrackA cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - is simply to remove a Genoa track end stop, slide on the cleat and lock it in the desired position.When not...

Stanchion CleatDesigned to fit stanchions or pushpit/pulpit tubes - fits in seconds and features soft nylon jaws that will not damage the tube.Technical Specifications:Material - NylonDimensions (Cleat length) - 4.37" (111 mm)Weight - 3.17 oz (90...

Shroud CleatBarton Marine's Shroud Plain Cleat is a multipurpose cleat that conveniently clamps onto shroud wire (maximum diameter - 8mm (5/16") securely and without causing damage.Features:Clamps onto shroud wire without causing damageSimple and...