Clamp-On Flag Pole - 1/2" Diameter Stainless Steel Clamp & PoleFeatures:Clamp-On FlagstaffPole made of 304 S.S.Clamp made of 316 S.S.Diameter - 1/2,Length - 17",Clamp Tube Size-7/8" Specifications:Type: Flags & Flag PolesBox Dimensions: 1"H x...

Flush Mount Flag Pole Socket - Stainless Steel - 1-1/4" IDFeatures:316 S.S. Flush Mounted Flagpole Socket.Tube inside dia - 1-1/4"Base 2-3/4"Height - 2-9/16"Fastener - #12 (3) Specifications:Type: Flags & Flag PolesBox Dimensions: 3"H x 3"W x...

Top-Mounted Flag Pole Socket - CP/Brass - 1-1/4" IDFeatures:CP/Brass Top Mounted Flag Pole SocketTube I.D. - 1-1/4"Base - 2-3/4"Height - 2-1/8"Fastener - #6(3) Specifications:Type: Flags & Flag PolesBox Dimensions: 2"H x 3"W x 3"L WT: 0.5...

Top-Mounted Flag Pole Socket Polished Brass - 1" IDFeatures:Polished Brass Top Mounted Flag Pole SocketTube I.D. - 1"Base - 2-1/2"Height - 2"Fastener - #6(3) Specifications:Type: Flags & Flag PolesBox Dimensions: 3"H x 3"W x 3"L WT: 0.4...

Top-Mounted Flag Pole Socket CP/Brass - 1" IDFeatures:CP/Brass Top Mounted Flag Pole SocketTube I.D. - 1"Base - 2-1/2"Height - 2"Fastener - #6(3) Specifications:Type: Flags & Flag Poles

Top-Mounted Flag Pole Socket Polished Brass - 3/4" IDFeatures:Polished Brass Top Mounted Flag Pole SocketTube I.D. - 3/4"Base - 2"Height - 1-3/4"Fastener - #6(3) Specifications:Type: Flags & Flag PolesBox Dimensions: 2"H x 4"W x 6"L WT: 0...

Top-Mounted Flag Pole Socket CP/Brass - 3/4" IDFeatures:CP/Brass Top Mounted Flag Pole SocketTube I.D. - 3/4"Base - 2"Height - 1-3/4"Fastener - #6(3) Specifications:Type: Flags & Flag PolesBox Dimensions: 1"H x 3"W x 4"L WT: 0.5 lbsUPC:...

Top-Mounted Flag Pole Socket - Stainless Seel - 1-1/4" IDFeatures:316 S.S. Top Mounted Flagpole Socket.Inside Tube Dia. - 1-1/4"Base - 2-3/4"Height - 2-1/4"Fastener - #10 (3)Comes with 1/4-28 set screws (P/N 6249) Specifications:Type: Flags & Flag...

Teak Flag Pole - 36" - 1-1/4" Base DiameterFeatures:Teak Flag Pole36" Length1-1/4" Base DiameterHardware not includedTraditional ball cap style flag pole Specifications:Type: Flags & Flag PolesBox Dimensions: 1"H x 1"W x 36"L WT: 0.95...

Teak Flag Pole - 30" - 1" Base DiameterFeatures:Teak Flag Pole30" Length1" Base DiameterHardware not includedTraditional ball cap style flag pole Specifications:Type: Flags & Flag PolesBox Dimensions: 2"H x 2"W x 30"L WT: 0.7 lbsUPC:...

Teak Flag Pole - 18" - 3/4" Base DiameterFeatures:Teak Flag Pole18" Length3/4" Base DiameterHardware not includedTraditional ball cap style flag pole Specifications:Type: Flags & Flag PolesBox Dimensions: 1"H x 3"W x 18"L WT: 0.4 lbsUPC:...

Teak Flag Pole - 48" - 1-1/4" Base DiameterFeatures:Teak Flag Pole48" Length1-1/4" Base DiameterHardware not includedTraditional ball cap style flag pole Specifications:Type: Flags & Flag PolesBox Dimensions: 2"H x 2"W x 49"L WT: 1.4...

Gasket & Seal Set for Helm Pumps MT30-MT140Full service kit for VETUS Helm Pumps MT40 to MT140 (including the more recent MTP42, MTP53)Consists of shaft seal (HS801 25 x 42 x 7mm) and back plate gasket (HS804).

Strainer for Type FTR140This strainer is for the FTR140 waterstrainers.

Replacement O-Rings Set - 5-PackSet of 5 O replacement Ring seals for Vetus FTR330 Series Raw Water Strainers.

Set O-Ring & Cover for Waterfilter 330Features:Vetus part #FTR3301 is replacement strainer cover and o-ring for all Vetus FTR330 series raw water strainersSpecifications:Strainer size: 13 (33/64") to 38 mm (1-1/2")Note: Do not overtighten

O-Ring Set for Waterfilter 1320 - 5-PackThis set contains the O-ring (5x) for the FTR1320 Waterfilter

O-Ring & Cover for Waterfilter 1320Replacement lid (Cover) and O Ring kit for the VETUS FTR1320 series raw water strainer units.Fits all sizes from 38 to 51mm.

Adapter Plate to Replace BPS/BPJ Panels with BPSE/BPJE PanelsAdapter plate for use when replacing old BPS/BPJ panels with updated BPSE/BPJE type panels. The updated panels are 85mm x 85mm, whereas the old style panels measured 98mm x 98mm. Quick Guide...

Set of Shear Pins for Bow Thruster 45 & 50kgf - 5-PackSet of brass inboard shear pins (3 x 23.3mm) parallel, for the Vetus 45 and 50Kgf Bow Thrusters.