Marine Navigation & Instruments

Sub Categories

Faria Adjustable In-Hull Transducer [SN2010]

$205.99

Adjustable In-Hull Transducer This in-hull transducer has a patented adjustable feature which ensures that sound waves are transmitted vertically to the bottom on almost any hull with a deadrise up to 22°.  With no hull penetration,...

Faria Beede Instruments

Faria Transom Mount Transducer - 235kHz [SN2011]

$164.99

Transom Mount Transducer - 235kHzWith a low profile this depth unit offers little drag and easy installation for dead rise angles up to 30°. Recommended for boats up to 22' (7M) and speeds up to 55 knotsDesigned with a release bracket to...

$Faria Thru-Hull Transducer - 235kHz, 1-5\/8" Diameter & 26' Cable [SN2060A]$

Faria Beede Instruments

Faria Thru-Hull Transducer - 235kHz, 1-5/8" Diameter & 26' Cable [SN2060A]

$154.99

Thru-Hull Transducer - 235kHz, 1-5/8" Diameter & 26' CableProvides minimal drag in the water. 235kHz transducer and 1-5/8" diameter with 26 feet of cable.This product may not be returned to the original point of purchase. Please contact the...

B&G

B&G VMHU Mast Cable - 36m [BGH030006]

$565.00

VMHU Mast Cable - 36mB&G 36 meter (118') cable for vertical arm masthead units.

Raymarine

Raymarine Raynet to RJ45 Female Adapter 100mm [A80247]

$84.99

Raynet to RJ45 Female Adapter 100mmThis adapter has a RayNet Female connector at one end, and a RJ45 Female Gland connector at the other end. The Gland makes the RJ45 Female socket watertight. A typical use for this cable would be to convert a RJ45...

$Garmin B265LH Bronze Thru-Hull Mount Transducer w\/Depth & Temp - 12-Pin [010-12379-20]$

Garmin

Garmin B265LH Bronze Thru-Hull Mount Transducer w/Depth & Temp - 12-Pin [010-12379-20]

$2,069.99

B265LH Bronze Thru-Hull Mount Transducer w/Depth & Temp - 12-PinGarmin's best performing 1 kW thru-hull transducer, this mount performs well in deep water and has exceptional bottom and water column detail.This transducer has a depth of 3,000 feet; an...

$Garmin TM265LH Plastic Transom Mount Transducer w\/Depth & Temp - 12-Pin [010-12378-20]$

Garmin

Garmin TM265LH Plastic Transom Mount Transducer w/Depth & Temp - 12-Pin [010-12378-20]

$1,329.36

TM265LH Plastic Transom Mount Transducer w/Depth & Temp - 12-PinGarmin's plastic transom mount performs well in deep water and provides exceptional bottom and water column detail.The best performing 1 kW transom mount, this transducer has a maximum...

Humminbird

Humminbird AS ECX 30E Ethernet Cable Extender - 8-Pin - 30' [760025-1]

$119.99

AS ECX 30E Ethernet Cable Extender - 8-Pin - 30'The Ethernet Extension Cable is a 30' cable that allows you to extend the length of your ethernet cables.WARNING: This product can expose you to chemicals including LEAD which is known to the State of...

Raymarine

Raymarine RayNet Cable Pullers - 5 Pack [R70014]

$34.99

RayNet Cable Pullers - 5 PackRaymarine's Cable Pullers securely attach to the twist-lock plug on RayNet networking cables and provide a convenient, center-mounted attachment point for your pull string. The cable puller protects the connector's internal...

Raymarine

Raymarine Masthead Cable & Base [A28162]

$144.99

Masthead Cable & BaseRaymarine's 30M Masthead Cable and Base for Raymarine ST60 and i70.

Navico

Navico WR10 Wireless Pilot Controller- Bluetooth [000-12316-001]

$399.00

WR10 Wireless Pilot Controller- BluetoothBluetooth® wireless technology adds simple remote functionality to all autopilots.The WR10 Wireless Autopilot Controller is for Lowrance, Simrad and B&G. The wireless controller allows boaters to maintain...

Airmar

Airmar 164WR-3 Double Handle Transducer Wrench [164WR-3]

$84.00

164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel...

Airmar

Airmar 75WR-3 Double Handle Transducer Wrench [75WR-3]

$56.00

75WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel...

Airmar

Airmar 60WR-3 Double Handle Transducer Wrench [60WR-3]

$56.00

60WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel...

Airmar

Airmar 117WR-3 Double Handle Transducer Wrench [117WR-3]

$53.73

117WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel...

Airmar

Airmar 164WR-1 Crows Foot Transducer Wrench [164WR-1]

$55.00

164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

Airmar

Airmar 75WR-1 Crows Foot Transducer Wrench [75WR-1]

$36.00

75WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

Airmar

Airmar 60WR-1 Crows Foot Transducer Wrench [60WR-1]

$35.00

60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

Airmar

Airmar 117WR-1 Crows Foot Transducer Wrench [117WR-1]

$32.10

117WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

Raymarine

Raymarine Trolling Motor Bracket [A80330]

$49.99

Trolling Motor BracketTrolling Motor Bracket specifically designed for the Dragonfly CPT-DV and CPT-DVS transom mount transducers. Specifications:Type: Mounting BracketsBox Dimensions: 1"H x 6"W x 8"L WT: 0.2 lbsUPC: 723193796177