Hydrodynamic Fairing Block for CB101 Series TransducersEchonautics fairing blocks are made for the thru-hull installation of traditional stem transducers. A fairing block is recommended for the installation of any traditional stem transducers to the...

Mix & Match Cable for Raymarine 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail...

MM-9N Mix & Match Cable for Simrad XSONIC Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail...

Furuno 10-Pin Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail...

MM-8G Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable.The short pigtail attached...

Y Cable for 2 CHIRP Transducers for CP470/CP570Raymarine Y Cable specifically for two CHIRP transducers for Raymarine's CP470 and CP670.

1M Adapter Cable with Male 9-Pin Navico Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with Navico units.

1M Adapter Cable with Female 8-Pin Garmin Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with Garmin units.

1M Adapter Cable with Male 8-Pin Black Box Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with SI-TEX NavPro units.

ActiveTarget™ 10' Extension CableThis extension is compatible with Lowrance ActiveTarget™.Features:10 ft. cable Specifications:Type: CablesBox Dimensions: 3"H x 6"W x 8"L WT: 1.15 lbsUPC: 9420064130436

Trolling Motor Barrel Mount f/Livescope Plus LVS34 Mount a compatible LiveScope™ transducer on the barrel of your trolling motor with this kit. It is easily adjustable as it features molded teeth and fits all barrel diameters, including those...

8 Degree Pole Mount f/Livescope Plus LVS34Position your LiveScope™ Plus LVS34 transducer on this 8-degree pole mount for an optimal viewing angle while ice fishing (works for open water fishing too).

0 Degree Pole Mount f/Livescope Plus LVS34Position your LiveScope™ Plus LVS34 transducer on this 0-degree pole mount for an optimal viewing angle while ice fishing (works for open water fishing too).

Foulfree Transducer CoatingFormulated by industry-leading scientists and certified by Airmar for transducers.  Fouling on the face of transducers can reduce their sensitivity, bottom-echo returns and positive fish targets.  It can also...

Transom Mount BracketEasily attach your compatible 4-, 8- or 12-pin transducer to the transom of your boat with this mount that provides excellent sonar returns at all speeds.

Trolling Motor Mount f/GT36 and GT56 Easily attach your compatible 4- or 8-pin scanning transducer to the trolling motor of your boat with this mount. Its low-profile design provides ultimate protection from underwater obstructions and easy...

ActiveTarget™ Transom Mount Mounting KitReplacement Transom Mount Kit for the ActiveTarget™ Transducer.

ActiveTarget™ Trolling Motor Scout MountAttach an ActiveTarget™ transducer to the shaft of your trolling motor with the ActiveTarget Scan Mount for an overhead Scout view in front of your boat.

ActiveTarget™ Forward/Down Mounting KitAttach an ActiveTarget transducer to your trolling motor with the Trolling Motor Forward/Down Mount for Forward and Down views at the trolling motor.

ActiveTarget™ Trolling Motor Shaft MountAttach an ActiveTarget™ transducer to the shaft of your trolling motor with the trolling motor shaft mount for Forward, Down and Scout views.