The RAP-111BU consists of a 1.5" diameter rubber ball connected at right angles to a flat 6.25 x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including...

RAM 1.5" Ball Base w/Strap 0.5" to 2" DiameterThe RAM-108BU consists of a 1.5" diameter ball connected to a base with single strap. The strap will accommodate rails from 0.5" to 2" in diameter.Material:Powder Coated Marine Grade Aluminum Ball Size: 1.5"...

RAM-ROD 1.5" Diameter Ball & Hardware f/RAM 5 Spot Mounting BaseColor: Black Material: High Strength Composite

RAM Rail Clamp Base with 1.5" BallThe RAM-271U-12 is a round pipe base that connects to a pipe with a diameter from 1.25" to 1.875". Material: Powder Coated Marine Grade Aluminum Ball Size:1.5" Rubber Ball SizeNote: The "U" in the part number reflects...

RAM Rail Base with Zinc Coated U-Bolt & 1.5" Ball for Rails from 0.5" to 1" in DiameterThe RAM motorcycle handlebar base contains a 1.5" rubber ball designed to sit at right angles to the mounting rail. The zinc coated u-bolt accommodates rails in...

RAM 2" x 5" Bse w/1-1/2" BallThe RAM-202U-25 contains a 1" diameter rubber ball connected at right angles to a 2" x 5" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade AluminumBall...

RAM 2" x 3" Rectangle Base with 1.5" BallThe RAM-202U-23 contains a 1.5" diameter rubber ball connected at right angles to a 2" x 3" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine...

RAM 1.5" x 3" Rectangle Base with 1.5" BallThe RAM-202U-153 consists of a 1.5" diameter rubber ball connected at right angles to a 1.5" x 3" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated...

RAM 2" x 2" Square Base with 1.5" BallThe RAM-202U-22 contains a 1.5" diameter rubber ball connected at right angles to a 2" x 2" square base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade...

RAM 2" x 4" Rectangle Base with 1.5" BallThe RAM-202U-24 consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 4" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine...

RAM 2" x 2.5" Rectangle Base with 1.5" BallThe RAM-202U-225 consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated...

RAM 1.5" Ball Marine Electronic "RUGGED USE" Base for the Humminbird 100, 300, 500, 700 Series, Matrix Series and Lowrance Elite-5 SeriesThe RAM-107BU is a marine grade aluminum base with 1.5" rubber ball. The base connects to the underside of...

RAM 1.5 Inch Ball Base with Strap 0.5 Inch to 2 Inch DiameterThe RAM-108B consists of a 1.5" diameter ball connected to a base with single strap. The strap will accommodate rails from 0.5" to 2" in diameter.Material:Powder Coated Marine Grade Aluminum...

RAM 2" x 1.7" Base w/AMPs Hole PatternThe powder coated marine grade aluminum base consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 1.7" square base. The base has four pre-drilled holes at each corner, making the universal...

RAM 1.5" Ball with 1/4"-20 Male Threaded Post for CamerasThe RAM-237U, universal camera and camcorder base, consists of a 1.5" diameter rubber ball, connected to a 1/4"-20 camera thread. The male thread matches most standard camera and camcorder female...

RAM 2.5" Round Base (AMPs Hole Pattern), 1.5" Ball & 3/8"-16 Threaded Male Post for CamerasThe RAM camera base contains a 1.5" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 3/8"-16 threaded steel stud, centered, the...

RAM 2.5" Round Base (AMPs Hole Pattern), 1.5" Ball & 1/4"-20 Threaded Male Post for CamerasThe RAM camera base contains a 1.5" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 1/4"-20 threaded steel stud, centered, the...

RAM Double Socket Arm with Small Size Locking Knob for 1.5" Ball BasesThe RAM-201U-BL, standard double socket arm with small size locking knob, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end...

RAM Double Socket Arm with Locking Knob for 1.5" Ball BasesThe RAM-201LU, standard double socket arm with locking knob, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to...

Knob w/Lock & 5/16"-18 Brass Hole - C-SizeThe RAM locking knob, includes a brass 5/16"-18 thread, for 1.5" socket arms; this allowing you to disengage the screwing of the knob. Once you have set your mount in the location you need, you can lock it in...