Hardware

Sub Categories
Barton Marine
Barton Marine 165mm Sliding Cleat - Fits 25mm T Track [51253]
$62.94
$54.86
165mm Sliding Cleat - Fits 25mm T TrackA cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - is simply to remove a Genoa track end stop, slide on the cleat and lock it in the desired position.When not...
Barton Marine
Barton Marine Stanchion Cleat [52100]
$28.86
$21.88
Stanchion CleatDesigned to fit stanchions or pushpit/pulpit tubes - fits in seconds and features soft nylon jaws that will not damage the tube.Technical Specifications:Material - NylonDimensions (Cleat length) - 4.37" (111 mm)Weight - 3.17 oz (90...
Barton Marine
Barton Marine Shroud Cleat [52110]
$19.31
$16.83
Shroud CleatBarton Marine's Shroud Plain Cleat is a multipurpose cleat that conveniently clamps onto shroud wire (maximum diameter - 8mm (5/16") securely and without causing damage.Features:Clamps onto shroud wire without causing damageSimple and...
Barton Marine
Barton Marine Shroud Cleat w/Eye [52111]
$19.31
$16.83
Shroud Cleat with EyeBarton Marine's Shroud Plain Cleat with Eye is a multipurpose cleat that conveniently clamps onto shroud wire (maximum diameter - 8mm (5/16") securely and without causing damage.Features:Wide eye opening for stowage of...
Barton Marine
Barton Marine Kevlar Cam Cleat Maxi [70300]
$39.70
$34.59
Kevlar Cam Cleat MaxiManufactured from a composite Kevlar/Zytal material. This advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins; 'K' cams are solid, lightweight, and have excellent wear...
Barton Marine
Barton Marine Drain Plug - Black 15mm (19/32") [42357]
$5.64
$5.01
Drain Plug - Black 15mm (19/32")This screw-type black drain bung is still among the best available. Supplied with rubber `O' ring for a watertight seal.Specifications:Length: 15mm (19/32")weight: 7gm(.23oz)
Barton Marine
Barton Marine Transom Pintle [42400]
$14.80
$13.05
Transom PintleManufactured from stainless steel with tough nylon surrounds. A wide range of rudder fitting widths are available.Features:Pintle Diameter: 9.5mmFastenings Diameter: 5mmWeight: 70g
Barton Marine
Barton Marine Stanchion Bullseye Low Friction [60150]
$44.71
Stanchion Bullseye Stanchion Bullseye which fits the base of stanchions for smooth control of furling lines. The contemporary sleek design features a Dyneema-effect securing strap over the metal retaining rod, through-bolted onto a fully...
Barton Marine
Barton Marine Deck Organizer - Size 2 - 2 Sheave - Black [81682B]
$75.25
$57.46
Deck Organizer - Size 2 - 2 Sheave - Black Designed for use when diverting mast base control lines and halyards back to the cockpit. Allowing the crew to sail from the security of the cockpit.Suitable for boats up to 32' (9.75 M) with halyard...
Barton Marine
Barton Marine 58mm Diameter Ball Bearing Rope Sheave [64913]
$23.83
$20.76
58mm Diameter Ball Bearing Rope Sheave A replacement all-purpose rope sheave. Used throughout the complete Barton block range. Molded from UV-resistant acetal resin, the Barton sheave is made to survive the harsh marine environment. The...
Barton Marine
Barton Marine 64mm Diameter Ball Bearing Rope Sheave [64914]
$27.84
$24.26
64mm Diameter Ball Bearing Rope SheaveA replacement all-purpose rope sheave. Used throughout the complete Barton block range. Molded from UV-resistant acetal resin, the Barton sheave is made to survive the harsh marine environment. The unique, super-low...
Barton Marine
Barton Marine DO 550 Rope Clutch - Spring Assembly [81549]
$7.75
$6.74
DO 550 Rope Clutch - Spring Assembly Replacement spring assembly for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications:Color: SilverBox Dimensions: 1"H x 4"W x 6"L WT: 0.01 lbsUPC:...
Barton Marine
Barton Marine DO 550 Rope Clutch - Base Plate [81547]
$17.76
$15.48
DO 550 Rope Clutch - Base Plate Replacement base plate for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications:Color: SilverBox Dimensions: 1"H x 3"W x 7"L WT: 0.1 lbsUPC: 5035088815470Brochure (pdf)
Barton Marine
Barton Marine DO 550 Rope Clutch - Cam [81546]
$12.31
$10.73
DO 550 Rope Clutch - Cam Replacement cam for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications:Color: SilverBox Dimensions: 1"H x 2"W x 5"L WT: 0.1 lbsUPC: 5035088815463Brochure (pdf)
Barton Marine
Barton Marine DO 550 Rope Clutch - Handle [81545]
$9.57
$8.34
DO 550 Rope Clutch - Handle Replacement handle for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications:Color: BlackBox Dimensions: 2"H x 3"W x 6"L WT: 0.1 lbsUPC: 5035088815456Brochure (pdf)
Schaefer Marine
Schaefer Furler Pull Back Bracket/Haylard Restrainer - Large [78-75]
$55.70
Furler Pull Back Bracket/Haylard Restrainer - LargeHalyard Restrainer mounts directly on the front of the mast below the Genoa Halyard sheave. Restrainer "deflects" halyard eliminating Halyard Wrap.Halyard Restrainer appropriate for boats from 27' - 53'...
Schaefer Marine
Schaefer Stainless Steel Cleat - 3" [60-75]
$47.90
Stainless Steel Cleat - 3"3" SS Open Base Cleat. Includes urethane washers for isolation when attaching to spars. Maximum line size 1/4" (6mm), Length 3" (76mm), Height .6" (15mm), Fastener size #8 FH, Fastener center/center .78" (20mm), Weight 1.3oz (...
Schaefer Marine
Schaefer Aluminum Deck Cleat - 4" [70-94]
$47.40
Aluminum Deck Cleat - 4"Length 4" (102 mm), Line Score 3/8" (10 mm), Fasteners (2), #10 FH (5 mm), C/C A 1" (25 mm), Weight 1.5 oz. (43 g)
Schaefer Marine
Schaefer Cam Fairlead - Red [77-17-RED]
$8.15
Cam Fairlead - RedMounts directly to our 70-17 Cam Cleat. Will require (2) #10 RH fasteners.
Schaefer Marine
Schaefer Cam Fairlead - Black [77-17-BLK]
$8.15
Cam Fairlead - BlackMounts directly to our 70-17 Cam Cleat. Will require (2) #10 RH fasteners.