FRX10 Friction Ring - 10mm (25/64")Features:Efficient and lightFRX Wichard thimbles are efficient, light, and reliableVery strong and can be used for heavy loads and semi-static linesFRX thimbles are designed to make your lines run smoothly with minimum...

FRX6 Friction Ring - 7mm (9/32")Features:Efficient and lightFRX Wichard thimbles are efficient, light, and reliableVery strong and can be used for heavy loads and semi-static linesFRX thimbles are designed to make your lines run smoothly with minimum...

165mm Sliding Cleat - Fits 25mm T TrackA cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - is simply to remove a Genoa track end stop, slide on the cleat and lock it in the desired position.When not...

Stanchion CleatDesigned to fit stanchions or pushpit/pulpit tubes - fits in seconds and features soft nylon jaws that will not damage the tube.Technical Specifications:Material - NylonDimensions (Cleat length) - 4.37" (111 mm)Weight - 3.17 oz (90...

Shroud CleatBarton Marine's Shroud Plain Cleat is a multipurpose cleat that conveniently clamps onto shroud wire (maximum diameter - 8mm (5/16") securely and without causing damage.Features:Clamps onto shroud wire without causing damageSimple and...

Shroud Cleat with EyeBarton Marine's Shroud Plain Cleat with Eye is a multipurpose cleat that conveniently clamps onto shroud wire (maximum diameter - 8mm (5/16") securely and without causing damage.Features:Wide eye opening for stowage of...

Kevlar Cam Cleat MaxiManufactured from a composite Kevlar/Zytal material. This advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins; 'K' cams are solid, lightweight, and have excellent wear...

Drain Plug - Black 15mm (19/32")This screw-type black drain bung is still among the best available. Supplied with rubber `O' ring for a watertight seal.Specifications:Length: 15mm (19/32")weight: 7gm(.23oz)

Transom PintleManufactured from stainless steel with tough nylon surrounds. A wide range of rudder fitting widths are available.Features:Pintle Diameter: 9.5mmFastenings Diameter: 5mmWeight: 70g

Stanchion Bullseye Stanchion Bullseye which fits the base of stanchions for smooth control of furling lines.  The contemporary sleek design features a Dyneema-effect securing strap over the metal retaining rod, through-bolted onto a fully...

58mm Diameter Ball Bearing Rope Sheave A replacement all-purpose rope sheave. Used throughout the complete Barton block range.  Molded from UV-resistant acetal resin, the Barton sheave is made to survive the harsh marine environment. The...

64mm Diameter Ball Bearing Rope SheaveA replacement all-purpose rope sheave. Used throughout the complete Barton block range. Molded from UV-resistant acetal resin, the Barton sheave is made to survive the harsh marine environment. The unique, super-low...

DO 550 Rope Clutch - Spring Assembly   Replacement spring assembly for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications:Color: SilverBox Dimensions: 1"H x 4"W x 6"L WT: 0.01 lbsUPC:...

DO 550 Rope Clutch - Base Plate Replacement base plate for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications:Color: SilverBox Dimensions: 1"H x 3"W x 7"L WT: 0.1 lbsUPC: 5035088815470Brochure (pdf)

DO 550 Rope Clutch - Cam Replacement cam for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications:Color: SilverBox Dimensions: 1"H x 2"W x 5"L WT: 0.1 lbsUPC: 5035088815463Brochure (pdf)

DO 550 Rope Clutch - Handle Replacement handle for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications:Color: BlackBox Dimensions: 2"H x 3"W x 6"L WT: 0.1 lbsUPC: 5035088815456Brochure (pdf)

Furler Pull Back Bracket/Haylard Restrainer - LargeHalyard Restrainer mounts directly on the front of the mast below the Genoa Halyard sheave. Restrainer "deflects" halyard eliminating Halyard Wrap.Halyard Restrainer appropriate for boats from 27' - 53'...

Stainless Steel Cleat - 3"3" SS Open Base Cleat. Includes urethane washers for isolation when attaching to spars. Maximum line size 1/4" (6mm), Length 3" (76mm), Height .6" (15mm), Fastener size #8 FH, Fastener center/center .78" (20mm), Weight 1.3oz (...

Aluminum Deck Cleat - 5"Length 5" (127 mm), Line Score 1/2" (13 mm), Fasteners (2), #12 FH (6 mm), C/C A 1-1/4" (32 mm), Weght 2 oz. (57 g)

Aluminum Deck Cleat - 4"Length 4" (102 mm), Line Score 3/8" (10 mm), Fasteners (2), #10 FH (5 mm), C/C A 1" (25 mm), Weight 1.5 oz. (43 g)