Spinnaker Pole Slide Car (32mm)Features a heavy-duty stainless steel ring welded to an attachment plate, which is through-bolted to the slide. Generous ring opening to accept most pole ends.Plain bearing genoa cars, sliders, and spinnaker pole slides,...

Deck Plate with Fixing & Eye with Blanking Plug - M12 EyeTurned from solid bar 316 stainless steel with a highly polished finish, the deck plates have a centre anchoring hole in three standard metric thread sizes – M8, M10, and M12, each...

5/16 Stainless Steel Sail Snap +Features:Grade 316L stainless steel forged sail snapsEasy to install (single-handed operation)Efficient use: no jamming of the systemSpecifications:Materials: 316L stainless steel gradeLength (mm): 110Working load (kg):...

25mm T-Track Genoa CarBarton Marine introduces its sleek range of Genoa Cars designed to run on 25mm (1 ”) T-Track. All GT cars are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine...

DO 550 Rope Clutch - DoubleThe Barton D0 550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Molded parts are from high-grade plastics that are strong, light,...

13mm Low Beam Track - 2MThis track is extruded from high-grade 6061-T6 aluminum and hard coat-anodized for a hard, long-lasting surface.Specifications:Weight (g): 429 gWeight (oz): 15.1 ozMounting Hole Spacing (mm): 50 mmMounting Hole Spacing (in):...

SkyLock 800The Barton SkyLock 800 features 316 stainless steel side plates, glass-reinforced nylon cover plates, and an internal self-locking aluminum cam to lift and lock loads securely using lines of 8 12mm.The clever design and construction of the...

"Captain Hook" Chain Snubber Small Snubber Hook for 1/4" & 5/16" Chain with 12' of 1/2" 3 Strand NylonThe "Captain Hook" Chain Snubber can be used in a few different ways:Use the claw and attached line to relieve tension from your windlass while...

Opening Luff Rope PrefeederFeatures:Single-handed operation by pushing on the springEasy to install with a lashing or fixed to the forestayCan be installed below any headsail foil or headsail reefing configurationStainless steel forged...

Stainless Steel Cleat - 8"8" SS Open Base Cleat. Includes urethane washers for isolation when attaching to spars. Maximum line size 5/8" (16mm), Length 8" (203mm), Height 2.0" (51mm), Fastener size 5/16" FH, Fastener center/center 2.0" (51mm), Weight 1...

Quick Cleat - Stainless Steel - 3/8"The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  The heavy-duty version is made of 316-grade Stainless Steel and is suited for...

Swivel Cleat BaseSwivelling cleat unit, 15mm sheaves. Stainless steel arm, small C-Cleat™ & fairlead. Swivel cleat bases permit easy cleating and releasing from any angle.Line load should be limited to: MWL 125kg (275lb), BL 250kg (550lb)...

Investment Cast Pad Eye - 3" OD Base316 Stainless Steel includes delrin(tm) base. Order Backing Plate 97-54 separately. Specifications: Eye Width 1-1/8" (29 mm)Eye Height 7/8" (22 mm)Eye Stock 1/2" (13 mm)Length 3" (76 mm)Width 3" (76...

Stainless 1-1/4" T-Track Slider - Eye Slide/LinedSpecifications:Track Size 1-1/4" x 3/16" (32 mm x 5 mm)Max. Boat Length 38' (10 m)Max. Boat Weight 12000 lbs. (5455 kg)Max. Sail Area 520 sq. ft. (48 m2)Length 4" (102 mm)Width 1-11/16" (43 mm)Height...

Ball Bearing Swivelling Cam Cleat BaseSwivel cleat bases permit easy cleating and releasing from any angle.Swivel cleat bases permit easy cleating and releasing from any angle. Height adjustable arm for optimum cleating angle. Twin ball bearing race...

Large Bailer - Outside MountFlange Size: - 80 x 142mm (3-3/16 x 5-9/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of...

Super Medium Bailer - Inside MountFlange Size: - 67 x 135mm (2-11/16 x 5-5/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are...

Super Mini Bailer - Indside MountFlange Size: - 61 x 106mm (2-7/16 x 4-3/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made...