Furling Drum - 3.74"Drums are molded from glass fiber reinforced nylon with stainless steel swivel and ball bearing assemblies. Furling drums will accept lines up to 4mm in diameter.Features:Holds up to 8.5M of LineSpecifications:Drum Diameter: 95mmSail...

Genoa Slide with Loop for 32mm TrackHave a heavy-duty stainless steel attachment loop, through-bolted and riveted for extra strength. These units will accept most Barton blocks. A popular range of Genoa cars and sliders designed to run on a 32mm (11/4")...

Tidy-Ups Boat Dock Line Holder - Standard RailsFeatures:Rail mount UV resistant vinyl strap securely holds rope, cords, etc. Fits 1" - 1-1/4" RailsNot sold in pairsWARNING: This product can expose you to chemicals including...

Pulpit Anchor for 1" RailThis fitting can be used on the stern rail and bow pulpit to terminate jaw fittings for lower or upper life lines. (1/2" hole). The hole will not accept cast gate hooks. 

Eye to Deck Toggle FittingThis fitting can be mounted to any flat surface and accept life line fittings, line, etc. Toggling action is 140 degrees. 

Eye to Jaw FittingThis fitting will convert a small bail at the stern rail to the standard gate eye to accept the over center gate hook.

Eye to Eye Adjustable FittingThis fitting can be used wherever an eye is required on each side of the stanchion. Adjustable between 3/4" and 1". 

Short Adjuster for 3/16" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications:3/16" Wire1/4" Pin1" adj.

Short Adjuster for 1/8" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications:1/8" Wire1/4" Pin1" adj.

"T" Style Toggle Jaw for 3/16" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

"T" Style Toggle Jaw for 1/8" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

Deck Toggle "T" Style for 3/16" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.

Deck Toggle "T" Style for 1/8" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.

Double Threaded Interlocking Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut.

Double Threaded Interlocking Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut.

Interlocking Swivel Gate Eye for 3/16" WireAn interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate.

Interlocking Swivel Gate Eye for 1/8" WireAn interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate.

Single Threaded Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut.

Single Threaded Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut.

Single Swivel Gate Eye for 3/16" WireA single eye is used on one end of the gate area to attach the gate hook.